How to Interface 3 Positions Switches in the PScockpit Software

Select first the input and the 3 positions switch in the IOLayout page:

 The software will reserve 2 input for that switch.

For wiring, review your switch data sheet. Usually, the center pin is the common and you have to wire it to ground. The other two pins have to be wired to the inputs:

You can test it in Test mode.

Now, go to Commands Page of the PSCockpit Software and select 3 Pos Switches. You will see the list of all 3 Pos. switches of the configuration. Select the desire one and put the key combination you want to be sent to the sim. You will see 3 options: when the position 1 is active, when the position 2 is active and when none of them are active (Center):